Klarstein QUICKSTICK 10032670 Bedienungsanleitung Seite 12

EN
Setting the time
Press SET once: set hour. Press SET twice: Set minute. When the hour and minute
flash in the display, turn the wheel on the top of the device to set the time.
Maximum time settings is 59:59 h.
Setting the temperature
You can set the temperature at any time using the wheel, except when the time is
flashing in the display. The highest temperature that can be set is 95 °C (or 203 °F).
Preparing the food
Press the On/Off button once to begin heating and circulating the water. Place the
vacuumed food in the water when the set temperature is reached.
When the water reaches the set temperature, the sous-vide stick will emit three
beeps at 3-second intervals. This reminds you to add the food. Press SET to turn
off the beep. Once you have pressed SET, the display will start counting up the set
cooking time at the bottom right of „work time", showing hours on the left and
minutes on the right.
When the set time is reached and the cooking process is finished and, the signal
sounds again with three beeps in a 3-second interval. The signal reminds you to
take out the food. Press SET for 2 seconds to stop the beep.
After finishing the cooking process, switch off the device by pressing and holding
the ON/OFF key for more than 5 seconds.
12