Herunterladen Inhalt Inhalt Diese Seite drucken

Parts And Components; Before Use - cecotec FAST&FURIOUS 5040 ABSOLUTE Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
ESPAÑOL
Si en alguna ocasión detecta una incidencia con el producto o tiene alguna consulta, póngase
en contacto con el Servicio de Asistencia Técnica oficial de Cecotec a través del número de
teléfono +34 96 321 07 28.
34
FAST&FURIOUS 5040 ABSOLUTE

1. PARTS AND COMPONENTS

Fig. 1.
1.
Steam selector
2. Steam burst button
3. Spray button
4. Temperature indicator light
5. 360º swiveling cord
6. Temperature control dial
7.
Water tank
8. Soleplate
9. Spraying mouth
10. Water tank cap
11. Auto-clean button

2. BEFORE USE

Remove all packaging elements.
Inspect all parts of the appliance for visual damage. Unwind the power cord completely and
inspect it for damage. Do not use the product if it or its cord have been damaged or are not
working properly. In case of damage, contact the official Technical Support Service of Cecotec
for advice, repairs or returns.
Make sure you have read and understood all instructions and warnings in this instruction
manual. Pay particular attention to the safety instructions on previous pages.
Place the appliance on an even, heat-resistant surface. Do not place the appliance near heat
sources, places with high humidity levels, or combustible materials.
Plug the appliance into an appropriate wall outlet. The plug must be accessible so that,
in case of an emergency, it can be easily unplugged.
Note: You may notice a slight burning smell or smoke when using the appliance for the first
time, caused by the excess of lubricants from the manufacturing process. Ensure good
ventilation and let the appliance work until no odour or smoke can be noticed.
Fig. 2.
How to fill the water tank
Make sure the iron is turned off and unplugged from the mains supply before following the
below instructions:
Turn the steam dial to position '0' before filling the tank with water.
Open the cap of the tank and fill it up to the 'MAX' mark on the tank. The water level can be seen
through the transparent side of the tank when the iron is placed in an upright position.
ENGLISH
FAST&FURIOUS 5040 ABSOLUTE
35

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis