Troubleshooting - TensCare Mynd Bedienungsanleitung

12.

TROUBLESHOOTING

If your MYND device is not working
properly, please check the following:
Problem
The white
LEDs do not
turn on
No
sensation
Sudden
change in
sensation
If the above review has failed to resolve
your problem, or to report unexpected
operation or events, or provide feedback
call TensCare or your local dealer
(address on back cover) for advice.
Contact TensCare customer service on
+44 (0) 1372 723 434. Our staff are trained
to assist you with most issues you may
have experienced, without the need to
send your product in for service.
Possible
causes
Flat battery.
Intensity is not
strong
enough.
If
disconnect
and
connect a few
minutes later,
the signal
should feel a
lot stronger.
30
Solution
Charge
battery.
section 6.1.
Increase
strength.
you Always
strength
re- zero or turn the
device
before
removing
device
the forehead.
See
return
to
off
the
from