Alex Sew Fun Bedienungsanleitung Seite 12

1. Turn the Hand Wheel away from you to raise the Needle to its highest position.
2. Loosen the Needle Clamp Screw by turning it toward you. You may need to
use a fl at-head screwdriver or small pliers.
3. Remove the Needle, pulling down, away from the Needle Clamp.
4. Place the new Needle with the fl at side facing in, against the Needle Clamp.
5. Push it gently as far up as it will go.
6. Tighten the Needle Clamp Screw while holding the Needle in place.
Note: Sew Fun comes with one replacement needle, but sewing machine
needles are available at your local craft store. Needles come in various sizes
designated by numbers on the left of the needle. The smaller the number, the
thinner the needle. Use thinner needles with this machine.
Tight tension = short stitches
1. Loosen the stitch by turning the Tension
Screw counter-clockwise.
2. Tighten the stitch by turning the Tension
Screw clockwise. Sewing heavier fabric may re-
quire loosening the stitch. Very light fabric may
require tightening the stitch.
Have an adult help you with this!
If you fi nd that the stitches are too loose or
too tight, you can adjust the stitch tension.
Loose Tension = long stitches
11