Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.4 Further settings via the
menu "System settings"
The settings that can be made via the setup
wizard are also available via the corre-
sponding menu items of the menu "System
settings" . This menu also provides ad-
ditional setting and display options . An
overview of the options provided by the
menu "System settings" can be found
in fig . 27 .
The menu can be called up from any oper-
ating mode: Press the button MENU,
turn the knob CONTROL SELECT to select
System settin g s
knob to confirm . The menu "System set-
tings" will be shown:
System settin g s
Equaliser
Network
Time/Date
Lan g ua g e
Factory reset
For operation of the menu, the following
generally applies: To select a menu item
or setting, turn the knob; to call up a
menu item or to confirm a setting, press
the knob . To return to the previous menu
level, press the button BACK or, when in
a menu as shown in fig . 17, select the
field "CANCEL" and confirm .
22
3.4.1 Selecting the menu language
En g lish
Danish
Dutch
Finnish
French
Select the desired language in this menu .
The following languages are available:
English, Danish, Dutch, Finnish, French,
German, Italian, Norwegian, Polish, Por-
tuguese, Spanish, Swedish, Turkish .
firmed, the menu "System settings" will
appear in the language selected .
and then press the
3.4.2 Display backlight
>
Timeout
>
On level
>
Dim level
>
Fig. 21
1) Use
2) Use
3) Use
Lan g ua g e
*
Fig. 22
Once the selection has been con-
Backli g ht
>
>
>
Fig. 23
On level
to set the brightness
of the display backlight when the unit
has been switched on . Three settings
are available:
,
Hi g h
Medium
to set the brightness
Dim level
of the display backlight when the unit
is in the standby mode . Three settings
are available:
,
Medium
Low
(no display backlight) .
to set the time the unit
Timeout
must be in standby mode until the dis-
play backlight changes to the bright-
ness setting of the standby mode .
Select the desired time or the setting
(the display will not change to
On
the brightness setting of the standby
mode) .
3.4.3 Equalizer (sound adjustment)
Equaliser
Normal
Flat
Jazz
Rock
Movie
1) The current setting is indicated by an
asterisk
. To use a different setting,
*
select the setting and confirm .
2) For a user-defined adjustment, select
and call up
My EQ profile setup
Bass:
0
Treble: 0
Loudness: Off
a)
Bass
is selected . Press the knob
CONTROL SELECT . A menu with
an adjustment scale will appear:
Bass
Bass
and
.
Low
b) Turn the knob CONTROL SELECT
to adjust the low frequencies; then
press the knob to return to the pre-
vious menu .
and
Off
c) Adjust the high frequencies in the
same way .
d) In the line
knob CONTROL SELECT to activate
or deactivate the sound correction
feature (boosting of low frequen-
cies and high frequencies when the
volume is low) .
e) When the sound has been adjusted
as desired, press the button BACK .
The message
appear; confirm with
f) The menu with the sound preset-
tings will appear again (fig . 24) . For
the user-defined sound adjustment
to take effect, select the line
and confirm . The menu "System
settings" will appear again .
*
Fig. 24
:
My EQ profile setup
Fig. 25
dB
0
Fig. 26
, press the
Loudness
will
Save chan g es?
.
YES
My EQ
Werbung
Inhaltsverzeichnis
