Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Internet Radio Receiver
These instructions are intended for users
without any specific technical knowl-
edge . To set up the unit, users should
be familiar with the basic settings of
their Internet router . Please read these
instructions carefully prior to operation
and keep them for later reference .
1 Applications
The Internet radio receiver WAP-202RS
allows to access thousands of radio
stations and podcasts worldwide via the
Internet . Specific station names, genres
or locations can be searched . The con-
nection to the Internet router can be
established via cable (LAN) or via wire-
less LAN .
In addition, the unit offers the following
features:
– Reception of FM stations and digital
radio stations (DAB / DAB+)
– Replay of audio files on a USB storage
medium or a media server in the local
network (e . g . computer)
– Replay of Bluetooth sources
– Replay of an audio source connected
(e . g . MP3 player)
– Two alarm clocks that can be individ-
ually set
– Sleep timer function
– Possibility to control the unit by means
of a smartphone or tablet via the app
UNDOK™ (available free of charge)
– Multi-room support
– RS-232 interface for remote control,
e . g . via a computer
1.1 Conformity and approval
Herewith, MONACOR INTERNATIONAL
declare that the product WAP-202RS
complies with the directive 2014 / 53 / EU .
The EU declaration of conformity is avail-
able on the Internet:
www .monacor .com
RS-232
18
The product is generally approved for
operation in EU and EFTA countries; the
operation of the product is licence-free
and requires no registration .
2 Safety Notes
The product corresponds to all relevant
directives of the EU and is therefore
marked with
WARNING The product uses danger-
•
The product is suitable for indoor use
only . Protect it against dripping water,
splash water and high air humidity . The
admissible ambient temperature range
is 0 – 40 °C .
•
Do not place any vessels filled with
liquid on the product, e . g . a drinking
glass .
•
The heat produced inside the product
must be dissipated by air circulation;
therefore, never cover the air vents .
•
Do not use the product and imme-
diately disconnect it from the power
supply
1 . if the unit or the power supply cable
is visibly damaged,
2 . if a defect might have occurred after
the unit was dropped or suffered a
similar accident,
3 . if malfunctions occur .
Any repairs must be carried out by spe-
cialists .
•
Never pull the mains cable to discon-
nect the mains plug from the socket,
always seize the plug .
•
For cleaning only use a dry, soft cloth;
never use water or chemicals .
•
No guarantee claims for the prod-
uct and no liability for any resulting
WLAN
LINE OUTPUT
ANTENNA
L
LAN
R
.
ous mains voltage . Leave
servicing to skilled person-
nel and do not insert any-
thing into the air vents; in-
expert handling may result
in electric shock .
BT
ANTENNA
FM
ANTENNA
+
15 V
−
personal damage or material damage
will be accepted if the product is not
correctly used or not expertly repaired .
If the product is to be put out of
operation definitely, dispose of
the product in accordance with
local regulations .
3 Before Operation
3.1 Setting up and
connecting the unit
The unit can be installed into a rack
(482 mm /19") by means of the mounting
brackets . For rack installation, 1 RS (rack
space = 44 .45 mm) is required . However,
the unit can also be placed as a tabletop
unit .
Prior to connecting / disconnecting, switch
off all units involved .
1) Connect the RCA jacks LINE OUTPUT
to the line input of an amplifier (or a
different subsequent unit such as an
active speaker system, mixer) .
2) For replay via headphones, connect
the headphones to the 3 .5 mm jack
at the front side of the unit . The out-
put LINE OUTPUT will be deactivated .
CAUTION Never adjust a very high
headphone volume . Per-
manent high volumes may
damage your hearing!
3) For FM and DAB reception, connect a
corresponding antenna to the jack FM
ANTENNA . If the reception conditions
are good, the wire antenna supplied
(
☞
fig . 1) may be used .
4) The line output or headphone output
of an audio player (e . g . CD player or
MP3 player) can be connected to the
3 .5 mm jack AUX INPUT .
5) Integrate the unit into a local network
that is connected to the Internet via
a router . For cable connection to the
230 V~ /
50 Hz
FUSE
USE ONLY WITH A 250V FUSE
➀
Werbung
Inhaltsverzeichnis
