Makita 6904VH Bedienungsanleitung Seite 3

ENGLISH (Original instructions)
SPECIFICATIONS
Capacities
Square drive
-1
No load speed (min )
Impacts per minute
Max. fastening torque
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for fastening bolts and nuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model 6904VH
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model 6905H
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
Model
Standard bolt
High tensile bolt
Wood screw
Self-drilling screw
) : 95 dB (A)
pA
) : 106 dB (A)
WA
) : 94 dB (A)
pA
) : 105 dB (A)
WA
6904VH
M10 - M16
M10 - M12
6 mm x 100 mm
6 mm
12.7 mm
High: 0 - 2,400
Low: 0 - 2,100
High: 0 - 3,000
Low: 0 - 2,500
High: 196 N·m
Low: 147 N·m
265 mm
1.8 kg
/II
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model 6904VH
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model 6905H
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
3 ENGLISH
6905H
M12 - M20
M12 - M16
-
-
12.7 mm
2,200
-
2,600
-
294 N·m
-
275 mm
2.4 kg
/II
2
) : 6.5 m/s
h
2
2
) : 6.0 m/s
h
2