Changing To Cd/Mp3/Wma/C'n'c/ Cd Changer Mode; Inserting A Cd - Blaupunkt san francisco 300 Bedienungs- Und Einbauanleitung

CD/MP3/WMA/C'n'C/CD changer mode
• File extension of audio fi les:
– .MP3 for MP3 fi les
– .WMA for WMA fi les
• WMA fi les only without Digital Rights Manage-
ment (DRM) and created with Windows Media
Player version 8 or later
• MP3 ID3 tags: Version 1 and 2
• Bitrate for creating audio fi les:
– MP3: 32 to 320 kbps
– WMA: 32 to 192 kbps
• Max. number of tracks: 20,000
C'n'C mode
The C'n'C interface from Blaupunkt (C'n'C = Com-
mand and Control) allows an even more conven-
ient control of devices and data carriers that are
connected to the car sound system via a C'n'C-
ready Blaupunkt interface.
Before connecting a C'n'C-ready Blaupunkt inter-
face, check the mode of the rear AUX input. For
further details, please read the section "Rear AUX
input" in the chapter "External audio sources".
CD changer mode
You can connect the following CD changers to the
car sound system:
• Blaupunkt CDC A03
• Blaupunkt CDC A08
• Blaupunkt IDC A09
Information on handling CDs, inserting CDs and
operating the CD changer can be found in the
operating instructions supplied with your CD
changer.
Before connecting a CD changer, check the mode
of the rear AUX input. For further details, please
read the section "Rear AUX input" in the chapter
"External audio sources".
Changing to CD/MP3/WMA/C'n'C/
CD changer mode
Press the SRC button 6 repeatedly until
u
the desired audio source is displayed:
• "CD": Inserted CD.
32
• "MP3": Inserted CD that has already been
recognised as MP3 CD.
• "USB": Connected USB data carrier.
• Name of the device connected via C'n'C
• "CDC / AUX": Connected CD changer (if no
other external audio source is connected).
Notes:
• The respective audio source can be select-
ed only if a corresponding CD is inserted or
a corresponding device (e.g. a USB data
carrier or CD changer) is connected.
• If the car sound system fi rst has to read
the data of a connected device or data car-
rier before the playback, the display shows
"READING". For large data volumes, this
may take up to 1 minute. If the device or
data carrier is defective or the transferred
data cannot be played back, a correspond-
ing message appears on the display (e.g.
"ERROR" or "USB ERROR").
• If the connected CD changer fi rst acquires
the inserted CDs (e.g. after an interruption
of the power supply or a change of the mag-
azine), "MAG SCAN" is displayed. If the CD
changer does not contain any CDs or maga-
zine, "NO DISC" is displayed.

Inserting a CD

Note:
You must not hinder or assist the drive as it
automatically draws in the CD.
u
Insert the CD with its printed side up into the
CD tray 7 until you feel a slight resistance.
The CD is automatically pulled in and its data
are checked (the display shows "READING"
during this time). Afterwards, the playback
starts in CD or MP3 mode. If a CD is inserted,
the display shows the CD symbol.
Note:
If the inserted CD cannot be played back, "CD
ERROR" is briefl y displayed and the CD is au-
tomatically ejected after approx. 2 seconds.