Troubleshooting - contaclip EMS-3 Bedienungsanleitung

8. Troubleshooting

If your plotter EMS-3 is not functioning correctly, please check the following:
Device fails to switch on
Plotter does not respond to
data downloaded from PC
No labelling is taking place
even though a plotter pen has
been inserted.
Poor labelling quality, uneven
line thickness, missing items
Check whether the mains plug and connecting plug
are plugged in correctly.
Check whether the socket being used is functioning
properly. Is the green light on the power supply
illuminated? If not, please replace the power supply.
Is the interface cable connected properly?
Replace the data cable if necessary.
Is the device driver installed properly?
Check whether the plotter pen has dried out or if
there is sufficient ink in the pen.
Refill or replace the pen if necessary.
The plotter pen tip may be soiled. Clean the tip
carefully using a lint-free cloth dipped in special
cleaning fluid.
Replace the plotter pen if necessary.
13