CAME R-Serie Installationsanleitung Seite 17

3
Release only button 1: the LED keeps on fl ashing
quickly for about 4 s.
Once 4 s have elapsed the LED stay on continually
4
– at this point you can also release button 2.
The code which has been set using the Dipswitches
is now stored in memory.
RESET ALL THE DIP-SWITCHES TO OFF.!!
Always do this procedure for the transmitter to
work.
Warning!! To make the transmitter functional again and to avoid any correspondence between
the stored password and the Dip-switches (the code could be detected) set the Dip-switches to
OFF at the end of the procedure.
7