CAME R-Serie Installationsanleitung Seite 16

Key-Block input procedure
These buttons may not be duplicated onto another transmitter without knowing the pas-
sword.
1
Set the code on the
transmitter's dipswitch
After 5 s the LED starts fl ashing quickly.
6
WARNING!!
WITH THIS PROCEDURE ALL THE BUTTONS
ARE PROTECTED BY THE KEY-BLOCK MODE.
Choose the required ON/OFF combination and write it into
the apposite grille to save it:
2
Keep buttons 1 and 2 pressed.
The LED fl ashes slowly.
(AT LEAST 1 DIP SWITCH ON!)