Sanus VisionMount LF228 Bedienungsanleitung Seite 12

2-2
1
[01]
3
[26]
12
[26]
Solid Concrete and Concrete Block Mounting – See Cautions in Step 2.
Be sure the arrow on the back of the wall plate points upward.
1. Level wall plate [01] and mark the hole locations.
2. Drill pilot holes as illustrated.
3. Insert lag bolt anchors [26].
4. Tighten the lag bolts [25] only until the washers [27] are pulled fi rmly
against the wall plate [01].
2
4
[01]
[27]
[25]
13 mm 10 mm
(1/2 in.)
(3/8 in.)
89 mm
3.5 in.
(6901-002114 <00>)