Linea 2000 DOMO DO361A Gebrauchsanleitung Seite 59

Press the "timer off"button. The display will show the last setting of the "timer off" mode. Press the
"timer off" button again to start setting the delay time you want the air conditioning to stop working.
Every time you press the timer the delay time will change. Max to set delay time is 24 hours. After setting
the timer, it takes about 2 sec. Before the set temperature will be displayed again.
Illustrations to illustrate a 5-hour delayed stop.
Timer on + Timer off
You can also switch on both functions simultaneously. This determines when you switch on the apparatus,
but also when the apparatus switches off.
Please note: this time is always from the hour when you programme the setting. For example: it is now 1
pm. You want the apparatus to work from 4:30 to 6 pm. Set the TIMER ON on 3.5 h and TIMER OFF on 5.0
h.
SLEEP BUTTON
SLEEP
This setting can be used during the night. It will keep a comfortable sleeping temperature and will save
energy. This function can be selected with the "cool", "heat" and "auto" setting. The
on the display Cancel this setting by pressing the "on/off", fan, sleep or mode button.
When pressing the "sleep" button, the selected temperature will be elevated with 1 °C after 30 min. After
another 30 min the temperature will increase with another 1°C. The air conditioning will maintain this
temperature for 7 hours. After this time, the air conditioning will go back to the original set temperature
and the "sleep" function will end.
NOTE : this function cannot be selected with the "fan" or "dry" function.
SWING BUTTON
SWING
To adjust the air flow.
FOLLOW
FOLLOW ME BUTTON
ME
With this, the ambient temperature is measured by the remote control instead of by the unit. Place
the remote control where you want the set temperature to reach. This function ensures the optimum
temperature when using the 'auto' and 'cool' settings. Press the 'follow me' button to activate the
function. The remote control will send a signal to the air conditioner every 3 minutes. The symbol
appears on the display. Press the button again to cancel the function.
LED LED BUTTON
Press this button to turn off all the indicator lights on the display, e.g. when using the device at night.
Press the button again to turn the display back on.
www.domo-elektro.be
ON/OFF
SHORT
CUT
MODE TIMER
ON
TEMP
TIMER
FAN
OFF
FOLLOW
SLEEP SWING LED
ME
ON/OFF SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
FOLLOW
SLEEP SWING LED
ME
symbol appears
59
DO361A