Need To Know - Seamax SUP20MAX Bedienungsanleitung

▪
The pump's maximum air pressure is 20 PSI (1.378 Bar /138 Kilo-Pascal). The air pressure user setting is
recorded in the pump memory when power disconnected. Before every use of this pump, it is user's solely
responsibility to make sure that the pump is set to the desired air pressure. Incorrect air pressure setting may
either under or over inflate the inflatable product.
▪
This pump is designed to use car cigarette lighter port or boat 12V DC socket. If you will use a portable
battery, please make sure your pump's battery fully charged before your trip. Also make sure the battery
voltage is 12V. The max loading of power source can support 15 Amp current. The pump requires a minimum
12V, 7AH battery as power source to work properly.
▪
Always check the air hose, valve connector, and the inflatable product before starting the pump. Do not block
the Inflation port and Deflation port. This pump will make a loudly sound since its high pressure 2nd stage
cylinder pumping unit.
▪
This pump can auto switch from 1st stage to 2nd stage, or 2nd stage to 1st stage base on the pressure reading
from its internal sensor. The switch point is set at 0.8 PSI.
▪
The pump will auto stop after continuously running for 20 minutes. It is suggested to cool down the pump
before its next continuous operation. Otherwise you must check the pump temperature before next use. For
fast cool down the pump, you can turn on the air pump to let it work in the air for 1 minute.
▪
If you have to return the product, please first contact with Seamax Marine or the dealer that you purchase it
from. Repairs may only be performed by an authorized service technician. The manufacturer is not
responsible for damage caused as a result of improper use or failure to observe these instructions.
▪
This pump shall not be exposed to the rain or immersed in water. Do NOT leave the pump unattended while
inflating.
▪
You need to tune up your car 12V socket if you see the pump power plug over heat.
▪
Dirt inside the car 12V spclet will cause fire. Always check the connection before use. Our provided 12V
battery click will help you the avoid those issues. Always carry this part with your pump.
▪
Wrong operation or self modification may cause the pump and car damage.
Select a Right O-Ring for Air Valve
4 | P a g e

NEED TO KNOW

QUICK AND EASY CONNECTION
Screw in the Air Hose on the Pump Connect to 12V Cigarette Lighter Port