Technical Specifications - Life & Mobility Mezzo 3 Gebrauchsanweisung

Technical specifications Mezzo 3
Intended use:
ƒ
outdoors, between ­5 °C and +40°C
ƒ L x w x h: 138 x 64 x 119 cm
ƒ L x w x h (without seat): 138 x 64 x 88 cm
ƒ Weight without batteries (with batteries 60 Ah):
80 kg (118 kg)
ƒ Weight of heaviest removable part (seat): 15 kg
ƒ Maximum static stability downhill: 15 º
Maximum static stability uphill: 15 º
ƒ
Maximum static stability sideways uphill: 15 º
ƒ
Maximum dynamic stability uphill: 10 º
ƒ
ƒ Maximum safe gradient: 10 º
ƒ Max. driving distance with fully­charged
batteries*: 35 km (22 miles ­ 50 Ah) / 40 km
(25 miles ­ 60 Ah) / 50 km (31 miles ­ 73 Ah)
ƒ Maximum obstacle height: 10 cm
ƒ Maximum obstacle drop (pavement): 10 cm
ƒ Ground clearance: 8 cm
Max. (programmable) speed: 15 km/h**
ƒ
Minimum braking distance (programmable): 300
ƒ
cm
ƒ Seat angle: 5 º
ƒ Seat depth: 42 cm
ƒ Seat width: 48 cm
ƒ Seat height above footrest (min. ­ max.): 44 ­ 54 cm
ƒ Height of footrest above ground: 17 cm
ƒ Back angle: 90 ­ 180º
Back height: 48 cm
ƒ
Armrest height (to seat): 20 cm
ƒ
Armrest length (to backrest): 26 cm
ƒ
Turning circle (radius): 140 cm
ƒ
ƒ Turn around width: 160 cm
ƒ Test dummy weight: 160 kg
ƒ Max. user weight: 160 kg
ƒ Required operating force: approx. 1 N
ƒ Battery capacity (optional): 50/60***/73*** Ah
ƒ Max. load: 8 amps
Motor, transaxle: 500 watts 24 V
ƒ
Magnetic brake: 8 Nm 24 V
ƒ
GB12
* Depending on the
set speed, outside
temperature, weight of
the user, tyre pressure,
etc.
** Less is possible
*** Gel batteries
Technical specifications Mezzo 3
Ability to dismantle for transport: limited
ƒ
ƒ Wheel size: 3.00 – 8
ƒ Complies with: EN 12184 class C
The mobility scooter has 2 12­volt dry (gel) batteries.
The following types are suitable:
ƒ 50 Ah (228 x 140 x 255 mm)
ƒ 60 Ah*** (259 x 169 x 178 mm)
73 Ah*** (276 x 171 x 210 mm)
ƒ
Test specifications
ƒ The scooter conforms to the following standards:
ISO 7176­ 8,9,14,16
ƒ Requirements and test methods for static, impact
and fatigue strengths: ISO 7176­8
ƒ Climatic tests for scooters: ISO 7176­9
ƒ Power and control systems for scooters: ISO
7176­14
Requirements for resistance to ignition:
ƒ
ISO 7176­16
Service and technical support
Contact your dealer if you have any questions about
specific settings, maintenance or repairs. Always have
the serial number ready. You can find these on the
mobility scooter's CE sticker (see also page 20).
GB13