Connecting The Power And Video Cables - HP Pavilion MX75 Benutzerhandbuch

Connecting the Power and Video
Cables
Before connecting any cables, be sure to read
the safety instructions at the beginning of this
manual. The PC and monitor must be turned off.
To connect the power and video cables:
1 Connect the power cord to the back of the
monitor.
4
HP Pavilion MX75 Monitor Guide
Filename: M0075KEU2.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: James Zimmerman
Revision #: 35 Page: 4 of 32 Printed: 10/13/00 11:23 AM
2 Plug the power cord into a power outlet.
3 Connect the blue plug on the video cable to
the video port of your PC. If you have an
HP Pavilion, this port is marked in blue.
However, on some HP Pavilions, the port
could be marked in orange. (The illustration
below is for reference only. Check your PC
user's guide for the video port location.)
Last Saved By: WASSER, Inc.