Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Clamping lever adjustment
MASTERLIGHT LED 1000 & MASTERLIGHT LED 2000
If the lamp shade moves too tightly or does not maintain the
ts must be
Clamping lever adjustment
set position, it is necessary to adjust the braking effect of the
ination.
MASTERLIGHT LED 1000 & MASTERLIGHT LED 2000
clamping arm between the light arm and the stand post.
If the lamp shade moves too tightly or does not maintain the
set position, it is necessary to adjust the braking effect of the
Air
clamping arm between the light arm and the stand post.
pressure
rom 700
hPa to
1060 hPa
9. Technical data
Note: The technical data are subject to certain deviations. For operational reasons, the actual values may differ slightly from the
9. Technical data
values specified below. The values for Ra can deviate by approx. ± 5%. The color temperature values can deviate by APPROX. ± 500 K.
Note: The technical data are subject to certain deviations. For operational reasons, the actual values may differ slightly from the
values specified below. The values for Ra can deviate by approx. ± 5%. The color temperature values can deviate by
by the
must be
Photometric data
Brightness / 0.5 meter [lux]
Brightness / 1 meter [lux]
t must be
Color rendering index Ra
nical and
Color rendering index R9
Color temperature [K]
Heat build-up (head) [°C]
ure is
Light spot size Ø [cm]
A3) in
Dimming range [%]
Number of LEDs
Working lifespan of the LEDs [h]
perations,
Work area [cm]
ug it!
Lamp shade Ø [cm]
Height adjustment [cm]
Electrical data
Power input [W]
Operating voltage [V/DC]
Input voltage [V/AC]
Input frequency [Hz]
Amperage [A]
Protection class
Lamp shade protection class
(acc. to IEC60529)
Weight
Weight of lamp shade + stand [kg]
The rest of the technical data can be requested from the manufacturer (see the address on the back cover page).
The rest of the technical data can be requested from the manufacturer (see the address on the back cover page).
Electrical installation information
When switched on, KaWe examination lights are exposed to a peak current. Their standard scope of delivery includes a power
Electrical installation information
adapter with a plug.
When switched on, KaWe examination lights are exposed to a peak current. Their standard scope of delivery includes a power
adapter with a plug.
The MASTERLIGHT LED 2000/ 3000/ 3000F/ 4000/ 4000F examination lights are devices with Protection Class I. To
avoid the risk of electric shock, these devices may only be connected to a power adapter with a grounding wire!
The MASTERLIGHT LED 2000/ 3000/ 3000F/ 4000/ 4000F examination lights are devices with Protection Class I.
To avoid the risk of electric shock, these devices may only be connected to a power adapter with a grounding wire!
34
MASTERLIGHT LED 1000
MASTERLIGHT LED 1000
LED 1000
LED 2000
30 000
60 000
7 800
14 000
97
97
96
95
4000
4000
0.5
0.5
10
11
50-100
3
7
60 000
60 000
35-80
40-100
12
22
60
60
7
10
12
24
100-240
90-264
50-60
50-60
0.6
0.42
II
I
IP 42
IP 42
5
6
MASTERLIGHT LED 2000
MASTERLIGHT LED 2000
MASTERLIGHT model
LED 3000
LED3000F
LED 4000
-
-
40 000
50 000
95
95
94
94
4500
4500
0.5
0.5
17
15-20
50-100
50-100
12
12
60 000
60 000
70-140
70-140
29
29
121
121
18
18
24
24
100-240
100-240
50-60
50-60
0.75
0.75
I
I
IP 42
IP 42
12
12
± 500 K.
.
APPROX
LED4000F
-
-
60 000
70 000
95
95
94
94
4500
4500
0.5
0.5
17
15-21
50-100
50-100
19
19
60 000
60 000
70-140
70-140
33
33
123
123
28
28
24
24
100-240
100-240
50-60
50-60
1.2
1.2
I
I
IP 42
IP 42
12.5
12.5
Werbung
Kapitel
Inhaltsverzeichnis
