Herunterladen Inhalt Inhalt Diese Seite drucken

Vertical Ironing; Auto Shut-Off - Philips PerfectCare 9000 Serie Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PerfectCare 9000 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22

Vertical ironing

Hot steam is emitted from the iron. Never attempt to remove creases from a garment
that someone is wearing. Do not apply steam near your or someone else's hand.
You can use the iron in vertical position to remove wrinkles from hanging fabrics.
1
Hold the iron in vertical position, press the steam trigger and touch the garment
slightly with the soleplate (Fig. 17).
Note: For your safety, the intelligent automatic steam mode is not available for vertical
ironing.
MAX setting
For higher amount of steam, you can use the MAX setting.
1
Press and hold the on/off button for 2 seconds until the MAX light turns white (Fig. 18).
Note: In Max setting, your appliance will always give the maximum steam amount, while
the temperature will still adjust automatically.
2
The appliance returns to normal steam mode automatically after 15 minutes to save
energy.
3
To directly switch off the MAX setting at any time, press and hold the on/off button for
2 seconds until the MAX light goes off.

Auto shut-off

-
To save energy, the appliance enters the standby mode if it has not been used for
4-5 minutes. The light in the on/ off button starts to flash (Fig. 19).
-
To activate the appliance again, press the on/off button or the steam trigger. The
appliance starts to heat up again.
-
The appliance switches off automatically if it has not been used for another 10
minutes after it enters the standby mode. The light in the on/off button goes off.
IMPORTANT - EASY DE-CALC
It is very important to use the EASY DE-CALC function as soon as the EASY DE-CALC light
starts to flash (Fig. 20) and the appliance beeps continuously.
The EASY DE-CALC light flashes and the appliance beeps continuously after about a
month or 10 ironing sessions to indicate that the appliance needs to be descaled. Perform
the following EASY DE-CALC procedure before you continue ironing.
1
Remove the plug from the wall socket.
2
Place the appliance on the edge of the tabletop.
ENGLISH
9
17
18
2 sec
19
20

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Perfectcare psg9030/20

Inhaltsverzeichnis