Vertical Ironing; Putting Down The Iron During Ironing; Energy Saving; Eco Mode - Philips PerfectCare Elite GC9600 Serie Bedienungsanleitung

Vertical ironing

Hot steam is emitted from the iron. Never attempt to remove creases
from a garment that someone is wearing. Do not apply steam near your
or someone else's hand.
You can use the iron in vertical position to remove wrinkles from hanging
fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch
the garment slightly with the soleplate.

Putting down the iron during ironing

- During ironing, you can place the iron either on the iron platform
or horizontally on the ironing board. Thanks to the OptimalTEMP
technology, the soleplate will not damage the ironing board cover.

Energy saving

ECO mode

- By using the ECO mode (reduced amount of steam), you can save
energy without compromising on the ironing result. The green light is on.
- You can deactivate the ECO mode by pressing the ECO button.
The green light goes off.
Safety auto-off mode
- To save energy, the appliance switches off automatically when it has not
been used for 10 minutes. The auto-off light in the on/off button starts
to flash.
- To activate the appliance again, press the on/off button. The appliance
then starts to heat up again.
Note: The appliance is not switched off completely when it is in safety auto-off
mode. To switch off the appliance, press the on/off button.
ENGLISH
9