BENUTZERHANDBUCH – WebdynSunPM
Dieser Log ist auch bei der nächsten Verbindung zum Server im Verzeichnis „LOGS" zu finden.
Der Name der Datei setzt sich aus der uid des Hubs, gefolgt von „SUNSPEC" und dem Datum
und
der
Uhrzeit
des
Ablegens
der
Datei
auf
den
Server
zusammen:
„WPM00BDE4_SUNSPEC_210211_181543.log.gz"
Die Logdatei enthält genau das, was auf dem Bildschirm angezeigt wird:
21/02/11-17:27:28;SunSpec detection start on ethernet1. Estimated time :
621 seconds.
21/02/11-17:27:30;NON SUNSPEC device found at @1 192.93.121.23:502.
21/02/11-17:27:31;NON SUNSPEC device found at @2 192.93.121.23:502.
21/02/11-17:27:32;NON SUNSPEC device found at @3 192.93.121.23:502.
21/02/11-17:27:47;SunSpec device found at @126 192.93.121.23:502.
21/02/11-17:27:48;Found table 1:66 at 40004@126 192.93.121.23:502
21/02/11-17:27:49;Found table 11:13 at 40072@126 192.93.121.23:502
21/02/11-17:27:50;Found table 12:98 at 40087@126 192.93.121.23:502
21/02/11-17:27:51;Found table 101:50 at 40187@126 192.93.121.23:502
21/02/11-17:27:52;Found table 120:26 at 40239@126 192.93.121.23:502
21/02/11-17:27:53;Found table 121:30 at 40267@126 192.93.121.23:502
21/02/11-17:27:54;Found table 122:44 at 40299@126 192.93.121.23:502
21/02/11-17:27:55;Found table 123:24 at 40345@126 192.93.121.23:502
21/02/11-17:27:56;Found table 124:24 at 40371@126 192.93.121.23:502
21/02/11-17:27:57;Found table 126:64 at 40397@126 192.93.121.23:502
21/02/11-17:27:58;Found table 127:10 at 40463@126 192.93.121.23:502
21/02/11-17:27:59;Found table 128:14 at 40475@126 192.93.121.23:502
21/02/11-17:28:00;Found table 131:64 at 40491@126 192.93.121.23:502
21/02/11-17:28:01;Found table 132:64 at 40557@126 192.93.121.23:502
21/02/11-17:28:02;Found table 160:128 at 40623@126 192.93.121.23:502
21/02/11-17:28:03;Table 160. Type count not supported.
21/02/11-17:28:04;Found table 129:60 at 40753@126 192.93.121.23:502
21/02/11-17:28:05;Found table 130:60 at 40815@126 192.93.121.23:502
21/02/11-17:28:07;End of SunSpec detection on ethernet1. 1 devices found.
Bitte beachten Sie, dass die Logdateien der SunSpec-Erkennung im „CSV"-Format vorliegen,
so dass sie leicht in ein Tabellenkalkulationsprogramm importiert werden können.
149
Version 2.05
préliminaire