Maintenance; Time Of Maintenance; Instructions For Maintenance - Vermeiren Illico Gebrauchsanweisung

EN
NL
4

Maintenance

Your nursing bed requires minimum maintenance, but it is advisable to inspect the nursing bed
regularly in order to keep it trouble-free for years.
4.1

Time of maintenance

CAUTION
• Repairs and replacements may only be undertaken by trained persons and only genuine
replacement parts of Vermeiren should be used.
• The last page of this manual contains a registration form for the specialist dealer to
record each service.
• The service frequency depends on the frequency and intensity of use. Contact your
specialist dealer to agree to a common timetable for inspection/maintenance/repair.
• To find a service facility or specialist dealer near you, contact the nearest Vermeiren
company division.
Once a year / for every new user
This nursing bed needs to be serviced and disinfected before passing on to a new user, but at
least once a year. Contact your specialist dealer for more information.
Every month
Visually inspect the following points regularly:
•
Keep your castor wheels free of wires, hair, sand and carpet fibres.
•
Check the working of the brakes. If the bed can be moved while the brakes are applied, you
should check wheels and brakes for wear, damage or contamination like oil, water...
•
Handset, motors, connection points and cables: check for damage like electrical wires that
are frayed, broken or that become exposed.
•
Check if all parts are well secured.
•
Check all parts for damage or wear. Contact your specialist dealer for possible repairs or
part replacements.
Every week
Cleaning:
•
Use a soft cloth or vacuum cleaner to remove dust.
•
In case of dirt, empty the nursing bed and remove the mattress. Wipe all parts with a damp
cloth (not drenched). If necessary, use a mild soap, suitable for varnishes and synthetics.
If stored
Make sure that the bed is stored dry to prevent mould or rust, see details in chapter 5.
4.2

Instructions for maintenance

4.2.1 Cleaning
CAUTION
• Keep handset, motors and connection points clean and protect them from moisture.
• Keep the operating console clean and protect it from water and rain.
• Never use a hose or high-pressure cleaner to clean the bed.
Wipe all rigid parts of the bed with a damp cloth (not drenched). If necessary, use a mild soap,
suitable for varnishes and synthetics.
Risk of injuries and damage
Risk of damage by moisture
10
Illico
2021-02
Maintenance