Rs485 Configuration; Ethernet Configuration; Analog Configuration; Memory - OHAUS i-DT61PW Bedienungsanleitung

EN-40
5203
5204
5205
5206
5300
5301
5302
5400
5401
5402
5403
5900
5901
Note: For ScaleMate's other functions, please contact an authorized dealer to obtain the software's
instruction.

4.7.3 RS485 Configuration

Please refer to RS485 Configuration in the Defender

4.7.4 Ethernet Configuration

Please refer to Configuration in the Defender

4.7.5 Analog Configuration

Please refer to Analog Configuration in the Defender
4.8

Memory

The Memory menu is different for i-DT61PW and i-DT61XWE. Please check the following sections for details.

4.8.1 Memory menu (for i-DT61PW model)

StatUs
[ ]
Status
To enable or disable the memory function.
OFF
= to disable memory function.
ON
= to enable memory function. Press the Print button to save weighing data.
EHPort
[ ]
Export
To export weighing data.
NO
= to export weighing data function is disabled.
Yes
= to export weighing data function is enabled.
dELEtE
[ ]
Delete
To delete weighing data.
NO
= to not delete weighing data
Yes
= to delete weighing data

4.8.2 USB memory (for i-DT61XWE model)

USB memory is used to store the weight readings for future reference. By connecting a USB flash drive to the
scale the weight readings can now be stored directly on the USB flash drive.
Note: this menu is only visible after a USB flash drive is detected.
The data will be stored in the flash drive in the following location:
\SYSTEM\DATA
A new file will be created monthly (one txt file stores a whole month's output data...). The name of the txt file
will be year plus month.TXT. For example, the name of the txt file for 2020.6 will be 202006.TXT.
Scale ID
User ID
User Name
Transaction ID
Mode
Information
Target
Alibi ID
Input Status
Output Status
SN
NewLine
End

6000 Ethernet Interface Instruction Manual.

6000 RS232/RS485/USB Interface Instruction Manual.

6000 Analog Kit Instruction Manual.
Defender 6000 Indicators