Receiving Unit; Description Of Operations - ELCA MAGO Betriebsanleitung

ENG man MAGO-EVO 03

5. RECEIVING UNIT

5.1 DESCRIPTION OF OPERATIONS

The receiving unit AR MAGO FEXI.A consists of three main parts.
-
MOTHER BOARD. It contains the STOP, SAFETY and command relays, the terminals for the electrical connection,
the power supply stage and support with the electrical connection of the radio receiving module.
-
RADIO RECEIVING MODULE. It contains all the electronics for the reception, the decoding of the commands
transmitted from the transmitter and the identification of the system. The card with the identification code is installed
on the radio receiver module.
-
IDENTIFICATION CODE CARD. It contains, as the name suggests, the identification code of the system that is
unique. This code allows the system to recognise the signals transmitted from the transmitter to which it is paired.
The operating data of the system is also stored on this card.
POWER LED
ENABLE LED
DIP SWITCH
RADIO MODULE
CONNECTOR
CONNECTOR OPTION
TX SIGNAL
- Page 12 -
MAGO-EVO Radio Remote Control
POWER SUPPLY
FUSE MAX 250 mA
STOP COMMAND FUSES
MAX 4 A
F3 STOP2
F4 STOP1
SAFETY COMMAND FUSES
MAX 4 A
F1 SAFETY 1
F2 SAFETY 2