Connection; Connecting The Dos Module To The Washer-Disinfector; Flowmeter; Strain Relief For Dispensing Hoses - Miele professional DOS K 85 Montageanweisung

Flowmeter

Strain relief for
dispensing hoses

Connecting the DOS module to the washer-disinfector

DOS module K 85 is supplied with a flowmeter which monitors the
dispensing of liquid media.
Highly viscous chemical agents can cause problems with dispenser
monitoring. In this case the dispenser monitoring system for labo‐
ratory applications should be switched off by Miele Service.
The strain relief provided with the DOS module for the dispensing ho‐
ses is fitted to the bottom right hand side of the back of the washer-
disinfector to prevent the hoses from dislodging themselves from the
dispenser connections during use.
The flowmeter and strain relief must only be fitted and commis‐
sioned by a Miele technician or approved person.
en - Connection
39