A 806 Holder For Single-Site® Instruments With Rinse Connection On The Shaft - Miele professional A 600 Gebrauchsanweisung

en - Areas of application
A 806 holder for
Single-Site®
instruments with
rinse connection
on the shaft
46
Connect the hose adapter to the rinse connection on the shaft of

the stapler.
The clamp is used to secure the hose adapter.
If the hose adapter has come loose from the rinse connection on
the stapler during reprocessing, it must be reprocessed again.
 The hose adapter must be unscrewed and replaced with a blind
stopper if the holder is not in use. Otherwise the loose end of the
hose adapter will be thrown about by the force of the water and
could cause damage.
Fit the instrument into the holder from below.

The pipe connection on the holder must be pushed into the rinse
attachment on the instrument.