Technical Data; Residual Risks - Scheppach DH1200MAX Originalbetriebsanleitung

Service
• Have your power tool serviced by a qualified re-
pair person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
m WARNING! This electric tool generates an elec-
tromagnetic field during operation. This field can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
Hammer safety warnings
• Wear ear protectors. Exposure to noise can cause
hearing loss.
• Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock:
Use suitable detectors to determine if utility lines
are hidden in the work area or call the local util-
ity company for assistance. Contact with electric
lines can lead to fire and electric shock. Damag-
ing a gas line can lead to explosion. Penetrating a
water line causes property damage or may cause
an electric shock.
• When working with the machine, always hold it
firmly with both hands and provide for a secure
stance. The power tool is guided more secure with
both hands.
• Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure
than by hand.
• Always wait until the machine has come to a com-
plete stop before placing it down. The tool insert
can jam and lead to loss of control over the power
tool.

6. Technical data

Mains voltage:
Power input:
Idling speed:
Impact rate:
Drilling capacity in con-
crete/stone (max.):
Protection class:
Weight:
16 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 60745.
Sound pressure level Drilling L
Sound pressure level Chisel L
Uncertainty K
Sound power level Drilling L
Sound power level Chisel L
Uncertainty K
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Vibration emission value a
= 14,89 m/s
Vibration emission value a
= 13,02 m/s
Uncertainty K = 1,5 m/s
Additional information for electric power tools
Warning!
The specified vibration value was established in ac-
cordance with a standardized testing method. It may
change according to how the electric equipment is
used and may exceed the specified value in excep-
tional circumstances.
The specified vibration value can be used to com-
pare the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect work-
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.

7. Residual risks

230V / 50Hz
1050W
Even if you use this electric power tool in ac-
480 min
-1
cordance with instructions, certain residual
3780 bpm risks cannot be rules out. The following hazards
may arise in connection with the equipment's
38 mm
construction and layout:
• Lung damage if no suitable protective dust mask
II
6 kg
• Damage to hearing if no suitable ear protection
3 dB
pA
WA
WA
3 dB
WA
(Handle)
h
2
(Additional Handle)
h
2
2
ing order.
is used.
is used.
93,8 dB(A)
pA
95,8 dB(A)
pA
104,8 dB(A)
106,8 dB(A)