Lupine BETTY R Bedienungsanleitung Seite 13

Mounting the lamphead
Helmet mount:
No tools are required for mounting this lamp. The helmet mount is already mounted to the lighthead.
You can attach this helmet light to almost any kind of helmet with ventilation openings.
First attach the thin velcro with the Lupine logo to one site of the helmetmount.
Note: The adjustability of the lighthead is defined by the silicone rings at both sides of the lighthead. To
always ensure flawless functionality, both black bolts must be tightened securely.
Headband:
Insert the lamphead into the FrontClick mount of
the headband. (Video on our YouTube channel "Lupi-
neLights") With the provided extension, the battery
may be carried in your jersey or backpack.
2 4
Then pull the other end of the velcro through the ven-
tilation openings available on your helmet and fix it on
the other side of the helmetmount. Direct the light into a
straight forward position and tighten the velcro to avoid
slipping of the lighthead during use.
With the provided extension, the battery may be carried
in your jersey or backpack. The velcro strap also provides
the possibility to mount the battery directly on the
helmet.
Heavy Duty headband:
For an extra strong fit, the lamphead can also be
mounted on the HD FrontClick headband.
(Art.No. 1050)
Mounting the battery & Accessories
Battery type:
The regular battery is mounted with a velcro as
shown here and on page 24. So called Smartcore
batteries also come with a capacity indictator as
explained on the next page.
USB One
The USB One turns your Lupine battery into a mobile power bank. Nearly every USB device can be recharged
within a very short time. (Art. No. 444)
Lupine battery Smartphone Tablet
3.5 Ah 3 - 4 x 0.5 x
6.9 Ah 6 - 8 x 1 x
13.8 Ah 12 - 16 x 2 x
Hardcase-Batteries:
Your battery is supplied with both a
short and a long Velcro strap, coated
with an anti-gliss material to ensure
a secure mount. Use the strap which
most closely matches your tube size.
GPS-Navigation
4 - 6 x
8 - 12 x
16 - 24 x
25