Installation Of The Infrared Control - Sentiotec Vitamy 164 Montage- Und Gebrauchsanweisungen

Instructions for installation and use

4.4. Installation of the infrared control

For the installation, commissioning and operation, follow the instructions
which are included which the control unit.
The control unit only supports the operating mode "Intensity mode".
Installing the control panel
Install the control panel in the designated place on the back wall of the cabin.
Fig. 38: Installing the control panel
For the installation of the control unit, open the seat bench.
p. 31/40
EN
wave.com4
Infra