Restoring Works Default Settings - Hama 00053133 Originalbetriebsanleitung

Configuration and operation
Restarting the device
‹ On the home page, click the button "Tools" and then select "Re-
set" in the menu on the left.
‹ Click the "Apply" button to start the restart.
‹ Confirm the following prompt with "OK".
The device is restarted.
NOTE
► Your settings are retained.

Restoring works default settings

You can restore the works default settings so that the user name
is reset to "admin", the password to "1234" and the IP address to
"192168.2.1".
NOTE
► With this method, all current configuration settings are deleted
and the works default settings are restored.
Proceed as follows:
‹ Hold the Reset/WPS button
pressed for 10 seconds until the POWER-LED
The device is now reset to the works default settings so that you can
access the device using this settings via your web browser.
WLAN Router 300
3
on the rear side of the device de-
7
g
starts to flash.
85