Automatic Wps Configuration - Hama 00053133 Originalbetriebsanleitung

Configuration and operation

Automatic WPS configuration

WPS (WiFi Protected Setup) is a function that simplifies the security
configuration of the wireless LAN connection.
NOTE
► In order to be able to use the function, the router/access point
and the remote station (WLAN USB stick, PCI card or PCMCIA
card) must have the WPS function.
There are two ways of performing the security configuration:
■ Configuration with button
■ Configuration with pin code
Configuration with button
‹ Press the Reset/WPS button
‹ Within 2 minutes, click button "PBC" under tab "WPS" in the
configuration program of the WLAN adapter.
Configuration with pin code
‹ Note the pin code displayed in the configuration program of the
WLAN adapter.
‹ Select the target network in the upper list and then click button
"PIN".
‹ Switch to the user interface of the device and select
Wireless→ WPS .
‹ Enter the noted code in the input field for the pin code and click
"Start PIN" to start the transmission. The connection is now set
up automatically.
After successful connection, a profile is created that automatically
sets up the connection again after a restart.
WLAN Router 300
3
on the device.
g
Setup →
81