Using The Sound Control Memory (Scm) - JVC KD-S871R Bedienungsanleitung

Using the sound control memory
(SCM)
You can select and store a preset sound
adjustment suitable for each playback source
(Advanced SCM).
Selecting and storing the sound modes
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources – FM1, FM2, FM3, AM, and CD.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the sources,
see "To cancel Advanced SCM – SCM LINK" on
page 25.
Select the sound mode you want.
SCM
Ex.: When you select "BEAT"
Each time you press the button, the sound mode
changes as follows:
SCM OFF BEAT
• When "SCM LINK" is set to "LINK ON" (see page
25), the selected sound mode can be stored in
memory for the current source and the effect
applies only to the current source.
• When "SCM LINK" is set to "LINK OFF," the
selected sound mode effect applies to any source.
Indication
SCM OFF (Flat sound)
BEAT
SOFT
POP
Recalling the sound modes
When "SCM LINK" is set to "LINK ON,"
select the source.
The sound mode stored in memory for the
selected source is recalled.
Notes:
SOFT
POP
• You can adjust each sound mode to your preference,
• To adjust the bass and treble reinforcement levels or
For:
Rock or
disco music
Quiet
background
music
Light music
F M
C D
Each time you change the
A M
playback source, the SCM
indicator flashes on the display.
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
on page 22.
to turn on/off the loudness function temporarily, see
page 20. (Your adjustments will be canceled if
another source is selected.)
Preset values
BAS TRE LOUD
00 00 ON
+02 00 ON
+01 –03 OFF
+04 +01 OFF
21