Playing A Cd Text; Prohibiting Disc Ejection - JVC kd-g701 Bedienungsanleitung

Playing a CD Text

In a CD Text, some information about the disc (its
disc title, performer, and track title) is recorded.
This CD Text information will be shown
automatically when you play a CD Text.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
Disc title / performer
( lights up on the display)
Elapsed playing time and
Current track number
Notes:
• The display shows up to 12 characters at one time
and scrolls if there are more than 12 characters.
See also "To select the scroll mode—SCROLL
MODE" on page 37.
Some characters or symbols will not be shown (will
be blanked or substituted) on the display.
• If no name is assigned to the CD, "NO NAME" will
appear. To assign a name to an audio CD, see page
39.
• If no disc title/performer or no track title is
recorded for the CD Text, "NO NAME" will appear.
• When track title is shown, TRACK indicator and
current track number also appear on the lower part
of the display.
24
Track title

Prohibiting disc ejection

You can prohibit disc ejection and can lock a disc
in the loading slot.
While pressing CD/CD-CH (for
KD-G801) or CD (for KD-G701), press
and hold for more than
2 seconds.
(For KD-G801)
or
(For KD-G701)
"NO EJECT" flashes on the display for about
5 seconds, and the disc is locked and cannot be
ejected.
To cancel the prohibition and unlock the
disc
While pressing CD/CD-CH (for KD-G801) or CD
(for KD-G701), press and hold
for more than 2 seconds.
"EJECT OK" flashes on the display for about
5 seconds, and the disc is unlocked.
again