Kenwood KDC-BT45U Bedienungsanleitung Seite 21

TROUBLESHOOTING
Symptom Remedy
• Switch off the developer options on the Android device.
"NO DEVICE" or
• Reconnect the Android device.
"READING" keeps
• If this does not solve the problem, the connected Android
flashing.
device does not support [BROWSE MODE]. ( 17)
Playback is intermittent Turn off the power saving mode on the Android device.
or sound skips.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
"ACTN DISABLED" An unavailable operation has been performed.
"AHA APP UPDATE Make sure you have installed the latest version of the Aha™
REQUIRED" application for KENWOOD application on your device.
"AHA UNAVAILABLE" Your device cannot be connected to Aha Radio server.
"CHECK APP" There is no response from Aha server.
"CHECK DEVICE" Check the Aha application on your device.
"CONNECT PHONE" Connect your device to the unit.
"LOGIN FAILED" Logging into Aha has failed.
"NETWORK UNAVAILABLE" The network has been disconnected.
"POOR GPS" The GPS reception condition of your smartphone is poor.
"NO SKIPS" Skips is not allowed.
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. ( 3)
detected.
• Make sure you have entered the same PIN code to both
Bluetooth pairing
cannot be made. the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 9)
Symptom Remedy
• Adjust the microphone unit's position. ( 9)
Echo or noise is heard
• Check the [ECHO CANCEL] setting. ( 10)
during a phone
conversation.
• Reduce the distance between the unit and the Bluetooth
Phone sound quality
is poor. device.
• Move the car to a place where you can get a better signal
reception.
• Use voice calling method in a more quiet environment.
Voice calling method
• Reduce the distance from the microphone when you speak
is not successful.
the name.
• Make sure the same voice as the registered voice tag is
used.
• Reduce the distance between the unit and the Bluetooth
Sound is being
interrupted or skipped audio player.
• Turn off, then turn on the unit and try to connect again.
during playback of
• Other Bluetooth devices might be trying to connect to the
a Bluetooth audio
player. unit.
• Check whether the connected Bluetooth audio player
The connected
Bluetooth audio supports Audio/Video Remote Control Profile (AVRCP).
player cannot be (Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
controlled.
"DEVICE FULL" The number of registered devices has reached its limit. Retry
after deleting an unnecessary device. ( 13, DEVICE DELETE)
"N/A VOICE TAG" Make sure the same voice as the registered voice tag is used.
"NOT SUPPORT" The connected phone does not support Voice Recognition
feature.
"NO ENTRY" / There is no registered device connected/found via Bluetooth.
"NO PAIR"
19
ENGLISH