Gewiss JOINON WALLBOX I-CON DLM Bedienungs- Und Installationshandbuch Seite 57

5. Once the charging station is identified, it must be selected and confirm the association by entering the
PAIRING code
6. It is possible to scan the QRcode located inside the station and on the warning sheet to easily identify the
charging station to which you want to connect
7. The pairing code can be found on the label located inside the station and on the warning sheet. Enter it in
the APP to complete the PAIRING phase.
8. When this phase is complete, the station will be connected to the APP and it will be possible to continue
with setting and selecting the operating mode.
57