Vox Delay; Emergnecy Channel 9/19; Main Menu; Display Description - Albrecht AE 6120 VOX Bedienungsanleitung

5.7.2. VOX delay

Long press the EMG/MENU button and then use the UP/DN
keys to select the submenu "VOX T".
The VOX delay function sets the time after which the automatic
transmission mode is disabled if no speech is detected:
Level 1
Time (sec) 0.5
There are 9 configurable delay levels. The default value is level 4.

5.8. Emergnecy channel 9/19

The EMG button is used to switch through CH 9, CH 19 and
back to the previously selected "normal" channel. Simply press
the button repeatedly.

5.9. Main menu

Long press the EMG/MENU button to enter the main menu.
Select your desired submenu with the UP/DN keys and confirm
your selection by pressing the turning knob.
You can make the following settings:
Display Description
KEY BP Key tones
ROG BP Roger Beep
SCM Scan settings
VOX L VOX sensitivity
VOX T VOX delay
RF.GAIN RF Gain
TOT SET Time Out Timer
RESET Factory reset
2 3 4
1.0 1.5 2.0
Selection
ON / OF
OFF or select 1-6 tones
S9 = Squelch Scan
T1 = Time Scan
selectable in 9 levels
selectable in 9 levels
selectable in 16 levels
Cuts of transmission after
0-10 min.
Resets the radio
5 6 7
2.5 3.0 3.5
8 9
4.0 4.5
27