Vox Delay; S-Meter; Scan Mode - Albrecht AE 6199 NRC Bedienungsanleitung

5.8.2. VOX delay

Long press the VOX button once and press it again briefly.
Then use the UP/DN buttons to select the desired delay.
The VOX delay function sets the time after which the automatic
transmission mode is disabled if no speech is detected:
Level
Time (sec)
There are 9 configurable delay levels. The default value is level 4.

5.9. S-meter

The S-meter shows the current signal strength. The strength is
indicated by the
more bars are displayed, the stronger the signal.

5.10. Scan mode

Your AE 6199 NRC radio has an
automatic channel search that can be
used to view all channels one after the
other.
• Long press the SCAN button.
• This initiates immediate scanning
of all channels and the SC symbol
appears on the LC display.
• Scanning stops every time a signal is received and you
can listen in on the conversation.
If no action is taken, the scanning process continues after either
the communication on the channel has ended or after approx. 5
seconds of observation time, if the communication continues.
• The search process can be cancelled at any time by
pressing the SCAN button.
• Pressing the transmission button also automatically stops
the scanning process.
30
1 2 3
0.5 1.0 1.5
symbol in the lower left of the display. The
4 5 6
2.0 2.5 3.0
7 8 9
3.5 4.0 4.5