Am/Fm Mode Selector; Vox Function; Vox Sensitivity - Albrecht AE 6120 VOX Bedienungsanleitung

Disadvantage: Manual setting is required. If the squelch is
mistakenly set too high, it decreases the reception sensitivity
and thus the range.

5.6. AM/FM mode selector

AM or FM modulation can be selected by pressing the MODE
button.
The current setting is displayed on the LCD screen.
If a channel from 41 to 80 (only available in region mode d) is
set, the device switches to FM mode regardless of the setting
on the lower channels.
When you switch back to channels 1 to 40, the AM mode is
restored, if it was previously selected.
The bar graph on the display shows the signal strength
(S-values) in 8 levels during reception.

5.7. VOX function

Long press the MODE/VOX button to switch the VOX function
on or off. When the VOX function is activated, the radio
automatically switches to transmission as soon as it detects
speech. You no longer need to pick up the microphone to
transmit messages.
The active VOX function is indicated by the symbol in the
display.

5.7.1. VOX sensitivity

The VOX Level is used to select the volume level above which
an automatic VOX transmission is activated.
Long press the EMG/MENU button and then use the UP/DN
keys to select the submenu "VOX L".
1 = low sensitivity, VOX only reacts to very high volume levels
9 = high sensitivity, VOX already reacts to very low volume
levels
The default value is level 6.
26