Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
changing the direction of opening the door on the
freezer
changing the direction of opening the door
If you find the direction of opening the door on your
appliance inconvenient, you can change it. Holes on
the opposite side have already been prepared in the
factory and are now plugged.
· Remove the cover of the upper hinge, unscrew the
hinge and take off the door (the door is not fixed on
the lower hinge).
· Unscrew the upper rail, replace it to the opposite
side of the appliance and fix it.
· Remove the washer from the lower hinge and
unscrew (rotate it in clockwise) the fastener on the
lower hinge.
· Replace the fastener and the washer in reverse order
into the opening of the lower hinge on the opposite
side of the appliance.
· Take off all door corners and interchange them
(instead of the corner with a hole insert the one
without the hole and vice versa).
· Put the door of the appliance on the lower hinge.
· Fix the upper hinge and cover it.
· Replace the slide guides to the opposite side of the door.
· Plug the remaining holes with decorative caps.
· Check the gasket, it shouldn't be creased and it
should seal well. In case it does not fit perfectly, pull
it out and rotate for 180°.
In certain models it is not possible to replace the
door gasket.
Should the seal not adhere to the casing of the
appliance perfectly, it will have to be heated from
a suitable distance (by means of hair drier, for
example) and lightly stretched to the required height.
· Unscrew the blocking element and the hinge of the
and take off the door.
· Plug the holes with plastic caps provided.
· Shift safety spring to the lower side of the door.
· Turn the door for 180° and replace it on the
opposite side of the low temperature compartment.
Fix the hinge and the blocking element of the door
(position of holes already provided).
mounting instructions
23
Werbung
Inhaltsverzeichnis
