mounting instructions
mounting dimensions and required air circulation
22
The rear wall of the appliance is getting warm during
the operation of the appliance (and water is evaporat-
ing from the drain pan on the compressor). You must
therefore provide for adequate air circulation on the
rear of the appliance.
· In the plinth of the kitchen unit intended for building
in the integrated appliance, there should be at least
200 cm² free space, for adequate air circulation.
· On the upper part of the appliance the air is coming
out, so try not to cover the opening for the outflow
air.
A (mm)
875
1025
1225
B (mm)
875-880
1025-1030
1225-1230