Normen Und Zulassungen; Zertifikate Und Zulassungen; Iso 9001-Zertifikat; Software-Lizenzvereinbarungen - Siemens SIMATIC IPC547J Betriebsanleitung

Normen und Zulassungen

10.1

Zertifikate und Zulassungen

10.1.1

ISO 9001-Zertifikat

Das Qualitätssicherungssystem unseres gesamten Produktentstehungsprozesses
(Entwicklung, Produktion und Vertrieb) erfüllt die Anforderungen der ISO 9001.
Dies wurde uns von der DQS (Deutsche Gesellschaft zur Zertifizierung von
Qualitätsmanagementsystemen mbH) bestätigt.
10.1.2

Software-Lizenzvereinbarungen

Wenn das Gerät mit installierter Software geliefert wird, dann beachten Sie die zugehörigen
Lizenzvereinbarungen.
10.1.3

UL-Zulassung

Für das Gerät liegen folgende Zulassungen vor:
• Underwriters Laboratories (UL) nach Standard UL 61010-2-201 Second Edition, File
E85972 (PROG.CNTLR.)
• Canadian National Standard CAN/CSA-C22.2 No. 61010-2-201
10.1.4

FCC Rules (USA)

Federal Communi-
cations Commissi-
on
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
SIMATIC IPC547J
Betriebsanleitung, 01/2021, A5E50553933-AA
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harm-
ful interference in which case the user will be required to correct the interference
at his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
10
167