Installation - Klarstein PURE BLIZZARD SMART 7K Handbuch

INSTALLATION

Important Hints on Installation
• Leave this mobile air-conditioner in an upright position for at least 2 hours before
first use.
• This air-conditioner may be moved indoor conveniently; leave the air-conditioner in
an upright position while moving it.
• The air-conditioner shall be placed on a flat ground surface.
• Do not install or operate this air-conditioner in a bathroom or other wet
environments.
Installation of the C shape buckle of the heat exhaust hose and unit
• Take out the C shape buckle of the heat exhaust hose and remove the plastic bag.
• Point the rotary hole at the end of the heat exhaust hose snap toward the rotation
shaft of the back shell and slide it onto the back shell in accordance with the snap
joint direction of the rotation shaft on the back shell (see picture). When the end
snap joint at the end of the rotation shaft of the back shell sticks out of the snap, it
means that the heat exhaust hose snap has been slided into place.
• Rotate the C shape buckle counterclockwise to clip the snap joint of the C shape
buckle of the back shell successfully through the guide of the slide way of the back
shell (see picture).
EN
35