Troubleshooting Guide - Kenwood HDP10 Bedienungsanleitungen

troubleshooting guide

Problem
The hand blender will
not operate
Hand blender starts
to slow or labour
during processing.
Excessive splashing
during processing
Power handle gets
hot during operation.
The mixture is not
blending.
Cause
No Power
Hand Blender not
assembled correctly
Speed selected too low
Recommended
operating time
exceeded.
Speed selected too high.
Container, bowl or pan
too shallow or too small
for ingredients being
processed.
The unit may have been
used for an extended
period of time.
The speed of the unit
may not be appropriate
for the ingredients being
blended.
7
Solution
Check hand blender
plugged in.
Check attachments
securely locked to power
handle.
Increase speed
Do not operate the hand
blender for longer than
50 seconds in any 4
minute period for heavy
mixture or the whisk
for 3 minutes in any 10
minute period.
Select a lower speed
initially and increase as
the mixture thickens.
Select an appropriate
sized container. Place
the blades into the food
before switching on.
Allow the unit to cool
fully before using again.
Gradually increase the
speed and blend until
desired result achieved.