Cleaning And Maintenance - Klarstein VITA PURE 2G Handbuch

CLEANING AND MAINTENANCE

Changing the filter
As soon as the POWER light flashes green, it is time to change the filter. Change
the filter according to the following instructions. After changing the filter, press
and hold the POWER/UV-C key for 5 seconds to restart. After that, the light should
stop flashing. The filter will last for approximately 6 months.
1. Open the front cover from above.
2. Remove the filter combination by pulling on the 2 strips.
3. Insert the new filter combination. Use the 2 strips on the filter to insert it
correctly.
4. Replace the cover, making sure that it is firmly in place.
5. Press and hold the POWER/UV-C button for 5 seconds to reboot.
Filter and housing cleaning
• Clean the outside of the unit, the pre-filter and the activated carbon filter at
least once a month. Depending on the quality of your ambient air, it may be
necessary to clean the filter more often.
• The combination filter consists of a 3-part filter system, consisting of a pre-
filter, HEPA filter and activated carbon filter. Clean the filters with the brush
attachment of your vacuum cleaner.
• Use a dry, soft cloth to wipe the surface of the device. Do not use benzine,
thinner or harsh detergents for cleaning, so as not to damage the device.
EN
13