Safety Instructions - Klarstein VITA PURE 2G Handbuch

EN
10

SAFETY INSTRUCTIONS

• Read all instructions and keep this manual in a safe place for future reference.
• To reduce the risk of electric shock in the event of a malfunction or failure,
the instrument must be connected to a grounded outlet. If you are not sure
whether your outlet meets the requirements, consult an electrician for help.
• Only connect the device to sockets that correspond to the specified voltage of
the device.
• Route the power cord so that no one can step on it. Keep the power cord away
from heat sources such as radiators, heaters, and stoves.
• Do not immerse the unit, plug or power cord in water or other liquids.
• Use the device in the presence of children only under supervision.
• Unplug the appliance before moving or cleaning it, opening the ventilation
grille, changing filters or when not in use for a long period of time.
• Do not push any objects through the ventilation slots.
• Do not run the power cord under a carpet.
• Do not cover the power cable with blankets, runners or similar.
• Do not route the power cord under furniture or other equipment and route it
so that no one will trip over it.
• Have repairs carried out only by qualified personnel. Have the device checked
if it has been damaged in any way or if the power cord or plug is damaged.
The same applies if liquids or objects have landed on the device, if the device
has been exposed to rain or moisture, if it is not working properly or if it has
fallen over.
• Use the device only in the household and strictly follow the instructions in the
user manual. We accept no liability for damage caused by disregarding the
instructions and improper use.
• Do not use the device outdoors.
• Do not place any objects on the device.
• Make sure that the ventilation openings are not covered by furniture, walls or
other objects so that the air can circulate.
• Do not attempt to repair the unit yourself. Repairs may only be carried out by
trained personnel.
• Do not use the device with remote-controlled sockets or external timers.