Atag HG61..N Anleitung Seite 52

INSTALLATION INSTRUCTIONS
preparing the hob
Fit the elbow supplied on the appliance's gas connection.
Remove the protective foil of the sealing strip (A) and attach the sealing
strip in the groove of the aluminium profiles or the edge of the glass
plate. Do not attach the sealing strip through the corner. Instead, cut
4 pieces that fit tightly together in the corners.
102
building in
1/2" ISO 228
(straight)
1/2" ISO 7/1
(conical)
sealing ring
1/2" ISO 228
(straight)
1/2" ISO 228
(straight)
only for France
sealing ring
Attention!
This only applies to the glass appliance.
In stainless steel appliances HG77..M
A
and HG97..M the sealing tape has
already been applied.
INSTALLATION INSTRUCTIONS
cut opening in worktop
Saw the opening in the worktop. This should be done very accurately
(building in dimensions).
If the woodtop is made of treated wood, then coat the sawn surfaces of
the top with sealing varnish, to prevent moisture causing the top to swell.
attachment points for mounting brackets
threaded hole /
screw / worktop
thin worktops
building in
thick worktops
103