INTEZZE HUB Bedienungsanleitung Seite 8

3) On the front panel, hold the slide switch to the far right (BT) until the LED
indicator light alternately flashes red and blue (active pairing mode).
4) Turn on Bluetooth on the phone/tablet and search for "Intezze HUB" on
the available BT devices. Select this item and confirm pairing. The LED
indicator light stops flashing and turns blue (OPT) or green (AUX).
5) Make sure that the output used on the back of the HUB corresponds to the
selected option on the front (analogue AUX or digital OPT).
Reconnecting to the device
Previously paired devices will reconnect to the HUB automatically once turned
back on. It is not necessary to pair again!
We recommend always switching on the HUB device first and then the device to
be reconnected to it. This makes it easier for the HUB to accept its connection
attempt and thus avoid complications with reconnection.
EN