INTEZZE HUB Bedienungsanleitung Seite 11

Volume is too low:
• In TX mode, check and increase the volume directly on the headphones as
well as on the TV. In RX mode, check the volume setting on the phone and
also on the target audio device.
There is a delay in the audio:
• In digital transmission there is always a slight delay behind the image due
to coding. You can control the delay by removing ambient noise,
shortening the distance between the headphones and the HUB, but most
of all by using headphones with aptX Low Latency, which is designed for
better audio and video synchronization. When set correctly, the delay is
minimal with no disruption. In some modern TVs, it is also possible to
compensate for BT headphone sound delay directly in the TV settings.
Warning
1) Keep the set volume at the lowest possible level. Listening to loud volumes
for an extended period may damage your hearing irreversibly!
2) Using the device in a very dusty or humid environment may result in
damage.
3) Do not use the device outside the allowed temperature range of -15 °C to
+50 °C.
4) Do not leave the device in direct sunlight for a prolonged period of time.
5) Never disassemble or otherwise repair the device yourself. There is a risk
of damage.
EN