Safety Instructions - PeakTech 3433 Bedienungsanleitung

Safety instructions

This product complies the requirements of the following European
Union directives for CE conformity: 2014/30 / EU (electromagnetic
compatibility), 2011/65/EU (RoHS), pollution degree 2.
WARNING! Read these operating instructions before use and keep
them in a known place. Always pass these operating instructions
together with the measuring device to other users.
For safety of operation of the device and to avoid serious injuries due
to current or voltage flashovers or short circuits, the following safety
instructions for operating the device must be observed

Never operate the device unless it is completely closed.

Only carry out measuring work in electrical systems in dry
clothing, preferably in rubber shoes or on an insulating mat.

It is essential to observe warnings on the device.

Do not expose the device to extreme temperatures, direct
sunlight, extreme humidity or moisture.

Do not operate the device near strong magnetic fields (motors,
transformers, etc.)

Before starting the measuring operation, the device should be
stabilized
transporting from cold to warm rooms and vice versa)

Avoid formation of condensation or dripping water on electrical
test equipment under all circumstances.

If you are not going to use the device for a long time, remove the
battery from the battery compartment.

Periodically clean the case with a damp cloth and a mild
detergent. Do not use corrosive abrasives.

Avoid any proximity to explosive and flammable materials.

Opening the unit and maintenance and repair work must only be
carried out by qualified service technicians.

Do not make any technical changes to the device.
to the ambient temperature
18
(important when