Sony LH70-Serie Bedienungsanleitung Seite 40

7. Operation Method
4
Press the key corresponding to the axis to be edited.
5
Use the numeric key to enter the value.
6
Use the key to finalize the setting. (The ABS lamp flashes.)
7
Press the key.
Editing of the multiple datum point is completed, and the
current value is displayed. (
Note
ABS indication remains on during datum point mode.
The machining datum point (No. 0) is used as the basis of linear compensation.
(Position of datum point value 0 = Compensation amount 0)
7-8
(E)
lamp goes out)
(Example: 20.000)
LH70