Settings For General-Purpose Applications And Milling Machine Function; Factory Shipping - Sony LH70-Serie Bedienungsanleitung

5. Settings

5-2. Settings for General-purpose Applications and Milling Machine Function

5-2-1. When Power is Turned On for the First Time after Factory Shipping
(General-purpose Applications and Milling Machine Function)
Power ON
Basic
settings
Approx.
Model
2 seconds
1-axis/2-axis model
Destination
country
(STD)
Measuring unit
resolution
(1)
or
Detailed
settings
Minimum display
resolution
(Measuring
unit resolution)
For 2-axis and
3-axis models only
Display
switching
(1-1, 2-2, 3-3)
For 1-axis and
2-axis models only
Axis label
switching
(1-X, 2-Y, 3-Z)
Compensation
value
(OFF)
Flicker control
(OFF)
Sleep
(OFF)
or
Start of operation
5-4
(E)
* The setting in parentheses ( ) is the factory setting.
* indicates the process when the setting does not be changed.
3-axis
model
1
Use to select setting content
2
Select axis
Use to select setting content
Performed for each axis. Use
Note 1
3
Select axis
Use and
Performed for each axis.
4
Select axis
Use to select setting content
Performed for each axis.
5
Select axis
Use to select setting content
Performed for each axis.
6
Use to select the setting (compensation), and then set each option
Select axis
7
Use to select setting content
8
Use to select setting content
(When the minimum display resolution is 0.001 mm)
to expand the selection option.
Note 1: Use
to
to select setting content
Enter the compensation value
1 STD/US/JPN
2 0.1/0.5/1/5/10/
00.00.01/
00.00.10/
00.01.00/
00.10.00
<Expanded>
0.05/2/20/25/
50/100/
or
01.00.00
to return
or .
3 Setting at 2 or
higher/Diameter
display at 2
(except for
angle)/Polarity
4 IN-1/IN-2/IN-3/
IN -
5 X/Y/Z
6 OFF/LIN Err
* See Part 5-5,
"Compensation".
7 OFF/1/2
8 OFF/1/5/10/30/
60
or
LH70